Go to: Settings > Recording & Playback > Padding Options > Padding Type > Manual. If you’re finding that some of your recordings are starting late or finishing early, we’ve added the option to change from this automatic behaviour and instead add a customisable amount of padding to the start and end of all recordings. However, sometimes broadcasters get it wrong, particularly on the more niche channels. This broadcaster signalling is normally very accurate and means recordings start and stop exactly when they should. This is because programmes almost never start or end at the exact scheduled time – they're usually a minute or two early or late, and sometimes even more. The T3-R normally starts and stops recording when the broadcaster signals that the programme starts and ends. Select ‘Confirm’ when you can see the picture. R will try each of the 3 HD resolutions for 15 seconds in this order: 1080p, 1080i and 720p.R can automatically cycle through common resolutions until you find one that works:.R to another TV that doesn't support that resolution.This could cause an issue if you set a resolution (e.g. R can also be manually set to a resolution in the Picture & Sound section of the Settings menu.R is set to auto detect the HDMI resolution but this can fail with some TVs.R may be set to an HDMI resolution that your TV does not support:.To retune, press HOME and go to: Settings > Channels > Retune.Īn incompatible HDMI resolution has been selected R says there is No Signal, you may have a problem with your aerial.Try changing to BBC One by pressing '1' on the remote control. R's remote and check if live TV is working.Once you find the input displaying the T3 Each press should cycle through your inputs. To change inputs, most TV remotes use a button labelled ‘AV’, ‘SOURCE’, ‘INPUT’, or with a TV icon and arrow. This displays the TV Guide, making it easy to tell when you find the right input.

R turned on and connected to your TV by HDMI, press the GUIDE button on your T3.The correct input on your TV is not selected R is turned on, the LED on the front is blue.R and an HDMI cable is connected from your T3.Ensure your aerial is connected to your T3

Bbc red button non hd